Publicité
HOW TO USE
Before using, clean the motor housing with a damp cloth. Wash the
blending stick and blade and wipe it dry.
1.
Place the bowl (F) in the stand. Press the dislocking lid (fig.1)
at the back until the bowl is put properly in its place.
2.
Mount the main unit onto the stand (fig.2-3) . To remove the
mixer, proceed in reverse>
3.
Press the dislocking zone (fig.1) and turn the main unit with
holder backwards (fig.4)
4.
Insert the beaters or the hooks (fig.5) it may be necessary to
turn the beaters or the hooks slightly while doing so.
It is important that you insert the hooks with the bigger ring
into the bigger hole.
5.
Turn the main unit into a horizontal position (fig.6)
6.
Switch on and choose your desired speed.
20
Publicité
