Publicité
10. Install new door seals and confirm seal attachment.
11. Reinstall wheel and torque lug nuts to recommended torque.
12. Follow instructions only if "C" pillar door seal clip breaks. Drill through bottom flange of seal and step assistes with 3/32" drill bit.
Tighten screw (GM part #11509253) through seal in step assist as shown. See figures 17 and 18.
GMT967 Running Boards
ALL INFORMATION WITHIN
DATE
ABOVE BORDER TO BE PRINT-
ED EXACTLY AS SHOWN ON
8.5 x 11 WHITE 16 POUND NON-
BOND RECYCLABLE PAPER.
PRINT ON BOTH SIDES, EX-
CLUDING TEMPLATES.
TO BE UNITIZED IN ACCOR-
DANCE WITH GMSPO SPECIFI-
CATIONS.
FIGURE 17
REVISION
IR 12OC11
INSTALLATION INSTRUCTIONS
DR
AUTH
TITLE
22819487
PART NO.
Grand Pointe Dr., Grand Blanc, MI 48439 6200
FIGURE 18
22819487
PART NO.
GMT967 Running Boards
4
16
SHEET
OF
4
16
SHEET
OF
Publicité
