Publicité
C
W
S
AUTION
ARNING
TATEMENTS
This device is intended to be operated by properly trained personnel who have carefully read the operating
manual and are familiar with the function of the device. Users should also comply with the specimen
receptable manufacturer's specific instructions for use, in addition to any other protocols established by the
testing organization.
WARNING: For the safety of both the operator and service personnel, care should be taken when using this
centrifuge if handling substances that are known to be toxic, radioactive or contaminated with pathogenic
microorganisms. Use appropriate personal protection equipment (PPE). When Risk Group II materials are
used, (as identified in the World Health Organization "Laboratory Bio-Safety Manual"), a Bio- Seal should be
employed. In the event that materials of a higher risk group are being used, more than one level of protection
must be provided. The use of flammable or explosive materials as well as those materials which have a
vigorous chemical reaction is prohibited.
Unplug the centrifuge before cleaning or performing maintenance.
WARNING: Inspect centrifuge for cracks or physical damage to cabinet, lid, rotor, or tube holders. Damage
may result in unsafe operation. Discontinue use until repairs have been performed.
The use of flammable or explosive materials as well as those materials which have a vigorous chemical
reaction is prohibited.
For your safety and durability of the machine, never transport or store centrifuge with tube holders inside
the machine.
WARNING: "Universal precautions"
1
should be followed in handling all items contaminated with blood or
other bodily fluids.
This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in
accordance with this operator manual, may cause interference to radio communications.
Operation of this equipment in a residential area may cause interference, in which case the user will be
required to correct the interference at his own expense.
Operation of this equipment in a manner not specified by the manufacturer may impair the protection
provided by the equipment.
Electrical Safety protection is provided by properly connecting the centrifuge to earth ground. Use only the
manufacturer provided line cord and ensure that it is connected to a properly grounded power receptacle.
Failure to do so will result in an electrical hazard.
Drucker Diagnostics | +1-814-692-7661 | CustomerService@DruckerDiagnostics.com | 3
Publicité
