Publicité
SAFE
The safety lock prevents the ignition
switch from being activated; prevents
accidental turning on of the device.
To activate this function, place the
screw/unscrew button in the middle
position.
CLEANING
Unplug the appliance from the mains and
allow it to cool before starting any
cleaning operation.
Clean the appliance with a damp cloth
soaked in a few drops of detergent.
Do not use solvents, products with an
acidic or basic pH factor such as bleach,
or abrasive products.
Prevent water or other liquid from
entering through the ventilation openings
to avoid damage to the interior parts of
the appliance.
Do not immerse the appliance in water or
other liquid or place it under the tap.
Improper cleaning can degrade the
surface of the appliance, shorten its useful
life and even cause dangerous situations.
CONSUMABLES
Always use consumables designed
specifically for your device model. You can
purchase this type of consumable in
specialized stores.
ANOMALIES AND REPAIR
In the event of a breakdown, take the
device to an authorized Technical
Assistance Service or contact Customer
Service on the website
www.casalstools.es.
Do not attempt to disassemble or repair it
as there may be danger. If the network
connection is damaged, it must be
replaced, proceed as in the case of a
breakdown.
CHARACTERISTICS
Rated voltage: 3.6V
Vacuum speed: n0: 200/min
Battery capacity: 2000 mAh
Weight: 0.31 kg
Sound pressure level (LpA) = 63.8 dB(A),
KpA = 3 dB
Power level sound (LwA) = 74.8 dB(A),
KwA = 3 dB
Vibration (ah) = 0.524 m/s2 , K= 1.5 m/s2
Note: These features are subject to
change without prior notice, depending on
the improvements introduced to the
device.
Note: Taking into account the
manufacturing tolerances of this product,
the maximum absorbed power may differ
from that specified.
Note: Taking into account manufacturing
tolerances of this product, the maximum
power used may differ from that
specified.
The vibration emission level indicated in
this information sheet has been measured
according to EN 62841-1 and can be used
to make a comparison between tools.
Equally valid for an evaluation of the
preliminary exhibition. Warning: Vibration
and noise emissions during use of the
power tool may differ from the total
declared value depending on the way the
tool is used and especially the type of
workpiece being worked. Safety
measures must be identified to protect
the operator based on an estimate of
exposure under actual conditions of use
(taking into account parts of the operating
cycle, shutdown and idle times, as well as
trip time). .
Publicité
