Publicité
Keep handles and gripping surfaces dry,
clean and free of oil and grease.
Slippery handles and gripping surfaces do
not allow for safe handling and control of
the tool in unexpected situations.
USE AND CARE OF BATTERY POWER
TOOLS
Recharge only with the charger
specified by the manufacturer.
A charger designed for one type of
battery may create a fire hazard if used
with another battery pack.
Use power tools only with specifically
indicated batteries.
There is a risk of fire when attempting to
charge batteries of a type other than that
intended for the charger.
When the battery is not in use, keep it
away from other metal objects, such as
paper clips, coins, keys, nails or other
small metal objects, which could make a
connection between one terminal and
another.
A short circuit between the battery
terminals can cause burns or a fire.
Improper use may cause fluid leakage
from the battery; Avoid contact with
said liquid. In case of accidental contact,
rinse the affected area with plenty of
water. If liquid gets into your eyes, also
seek medical help.
Liquid expelled from the battery may
cause irritation or burns.
Do not use a damaged or modified
battery or tool.
Damaged or modified batteries may
exhibit unpredictable behavior resulting in
fire, explosion, or risk of injury.
Do not expose a battery or charger to
fire or excessive temperatures.
Exposure to fire or temperatures above
130°C may cause an explosion.
Follow charging instructions and do not
charge the battery or tool if the
temperature is outside the range
specified in the instructions.
Charging the battery incorrectly or at
temperatures outside the specified range
may damage the battery and increase
the risk of fire. Remove the batteries from
the device if you will not use it for some
time.
Unplug the battery charger from the
mains when not in use and before
carrying out any cleaning operation.
Do not open the battery(ies).
When the battery(ies) are not in use, they
should be kept away from other metal
objects such as paper clips, coins, keys,
screws... that could establish a connection
from one terminal to another.
Store the battery(ies) in places where the
temperature does not exceed 40ºC.
MAINTENANCE Maintenance of your
power tool must be carried out by a
properly qualified technician, using only
identical replacement parts.
Only in this way is the safety of the power
tool guaranteed.
Do not repair damaged batteries.
Battery maintenance should only be
carried out by the manufacturer or an
authorized technical service. Improper
use, or use contrary to the instructions for
use, voids the warranty and the
manufacturer's liability.
SAFETY WARNINGS FOR
SCREWDRIVERS Hold the power tool by
the insulated gripping surfaces when
performing an operation where the
anchor or screw may come into contact
with hidden wiring.
Publicité
