Publicité
set 15 from tine shaft.
Reverse above steps to install tines.
Change tines from bracket
When one or two pieces of tine broken, it is
necessary to change the damaged tine instead of
complete tine set.
Loosen the screws from one side while hold
the lock nuts from other side.
Take off the damaged tine and replace with
the new one.
Checking transmission lubricant
6)
Lubricate the gear after the first 20 operating
hours, then every 40-50 operating hours.
Drain screw plug 53 is located on the right side of
transmission housing 46.
Lay the tiller on its left side and clean the
transmission to prevent dirt and debris before
remove the drain screw.
Using a hex key 5mm to unscrew the plug and
empty the oil from the transmission housing.
Fill up by using a grease gun with a
high-quality, automotive-grade grease until it
begins to seep out around the edge of the
hole of the nozzle.
If necessary, disassemble tines.
Reinstall the drain screw plug.
Storage
The application should be stored in a dry and
clean room and out of reach of children.
During extended periods of storage, during the
winter for example, ensure that the application is
protected against corrosion and frost.
At the end of the season, or if the application is
not to be used for longer than a month:
Clean the application.
Wipe over all metal surfaces with an
oil-impregnated cloth to protect them from
corrosion (non-resinous oil), or spray a fine
coat of oil onto them from a can.
Fold the guide bar down, and store it in a
suitable place.
Environment, Recycling and Disposal
Electrical devices do not go into the
domestic
accessories and packaging to an
eco-friendly recycling.
According to the European Directive 2002/96/EC
on electrical and electronic scrap, electrical
devices that are no longer serviceable must be
separately collected and brought to a facility for
an environmentally compatible recycling.
(Fig.
Technical Date
Power supply voltage:
Power consumption:
Idle Speed:
Working width:
Working depth max.:
Weight:
Sound level at work-place L
Measured sound power level L
Guaranteed sound power level L
Vibration
16
rubbish.
Give
devices,
230V~50Hz
1000 W
220 min
300 mm
220 mm
8.7 kg
71.4 dB(A)
PA
91.4 dB(A)
WA
92 dB(A)
WA
0.57 m/s
-1
2
Publicité
