Publicité
Trim Kit (Sold Separately)
Trim kit types available:
● One-Piece Trim Kit:
● UMAML11A-BL-TK (2024001707)
● UMAML11A-SS-TK (2024001708)
One-piece trim kit installation
1. Take out microwave oven and component(s) from the box and put on a flat surface.
Fig. 1
Fig. 1
2. Slide the trim kit onto the microwave oven (Fig. 1) so that the face of the oven and the trim kit are flush.
3. Attach the trim kit to the microwave oven with 4 - M4x10mm screws (Fig. 2).
Fig. 3
4. Place the microwave oven into the cabinet opening (Fig. 3).
5. Attach the microwave oven to the cabinet with 6 - M3x25mm screws (Fig. 4).
Electrical Connection
Connect the microwave oven to a 120 volt, 60 Hz, AC only, 15 amp or 20 amp dedicated circuit. It is recommended that
an individual circuit serving only the microwave oven be provided.
CCD-0008956 Rev: 08-08-24
M4x10mm
Screws x 4
M3x25mm
Screws x 6
Fig. 2
Fig. 4
- 9 -
Publicité
