Inspection - SKY PARAGLIDERS SKY DRIVE II Manuel D'utilisation

36 36

INSPECTION

Before the packing a thorough inspection is necessary.
1. Lines: carefully inspect all the lines on both sides to ensure that they are
undamaged from the riser all the way to the canopy.
2. Fabric: ensure that it is not damaged or contaminated.
3. Outer and inner containers: ensure that the handle is properly
and securely attached to the inner container and the riser is securely
(tightly) attached to the correct position on the harness. Any damage
or contamination that may lead to the failure of the system should be
inspected by the manufacturer. If you have any doubts concerning the
reliability of the system, send it to the manufacturer for inspection.
Correct packing of the canopy is essential for the reliability and safety of the
system. Therefore it is strongly recommended that the system is re-packed
only by an authorised and trained specialist, or the manufacturer.
 The reserve system is not to be discarded but should returned to the retailer
or to SKY PARAGLIDERS for recycling.
 If you are ever unsure about the information contained in the manual,
contact your SKY dealer.
 This document is not a contract.
 Sky Paragliders reserves the right to alter or modify its products without
notice.
 No reproduction without permission.
Published by Sky Paragliders, a.s.
Frydlant nad Ostravici, 30. September 2013