Technical Specifications - Nicols BIRDY BEAM/3 Notice D'utilisation

Installation :
The unit should be mounted by its screw holes on the bracket. Always ensure that the unit is firmly fixed to avoid vibration and
slipping while operating. The structure to which you are attaching the unit should be able to support 10 times the weight of the unit.
Also always use a safety cable that can hold 12 times the weight of the unit when installing the fixture.
The equipment must be fixed by professionals.

2. TECHNICAL SPECIFICATIONS

* 75W LED BEAM Moving Head
* LED: ultra bright 75W LED
* Color wheel with 7 colors + white
* Fixed gobo wheel with 8 gobos + white
* DMX Channels: 9/ 11
* Dimming : 0-100% / Strobe 1-20t/s
* Electronic focus
* Rotative prism
* Consumption: 100W
* Beam angle: 3°
* Power Supply: AC100-240V, 50/60Hz
* fuse 5X20 T2A/250V. 5mmx20mm
* Dimensions: 275 x 235 x 410 mm
* Operation mode: Auto, DMX, Master/Slave synchronization mode
* housing : high temperature resistant engineering plastic + alumunium alloy
* Weight: 6.2kg
Accessories
The accessories below were packed with product, please check if they are once open the package.
Power cable: 1PCS
User manual: 1 PCS
Omega: 2PCS
3. SETTINGS (LED display instruction)
FUNCTION
Mode 1: A001 is factory default setting. In this mode you receive the DMX512 signal control.
Press MENU to set ID address. Then, use UP or DOWN to change the value of ID address, then
press ENTER to save.