Publicité
English
6.11.4 User-defined programs
For the programs P4, P5 and P6, 3 individual time win-
dows each can be defined for the Comfort
temperature. Outside the defined time window, the
ECO temperature is assigned automatically.
If the programs P4 to P6 are not adjusted on a user-
defined basis, the ECO temperature is preset for the
whole day at the factory.
Press the
ously for 3 s to open the programming
menu.
Use the keys
and confirm with the
ends the menu.
Pr is shown on the display.
Use the
P5 or P6.
Confirm with the
(Start time) for time window 1 is
displayed.
Confirm with the
Change the start time with the
keys. Only whole hours can be set.
Confirm with the
(End time) for time window 1 is
displayed.
Confirm with the
Change the end time with the
keys. Only whole hours can be set.
Confirm with the
The time window 1 for comfort
temperature was defined from 6 am to
9 am.
Time window 2 is then shown in the
display.
Repeat the preceding steps for time
windows 2 and 3.
After configuring time window 3, Pr is
shown in the display.
Use the
P5 or P6, to configure them, or EXIT to
end the menu and confirm with the
Mode
key.
EN-11
Boost
and
keys simultane-
+
or
to select ON
Mode
key. OFF
+
or
keys to select P4,
Mode
key.
Mode
key.
+
key.
Mode
key.
Mode
+
key.
Mode
+
or
keys to select either
6.11.5 Deactivating the weekday programs
If the programming is no longer to be used, deactivate
it with the following steps:
6.12 Additional functions
Display
or
or
2409/A
TDTR 300/500/750/1000EW
Boost
Press the
and
keys simultane-
ously for 3 s to open the programming
menu.
+
to select OFF
Use the keys
or
and confirm with the
key.
Mode
Press the
key.
The display shows ----.
Mode
Press the
and
keys for 3 s until
NIV2 is displayed.
Press the
key for 3 s until the first
parameter is displayed.
Mode
should be pressed to move onto
the next parameter and, at the end, to
return to the initial state.
No access if key lock is active.
Meaning
Options
After the last entry,
display is illuminated
O On
continuously or for 10
seconds
Activate or deactivate
window monitoring
O Off
Temperature display
°C Celsius
in °C or °F
°F Fahren-
Restrict the comfort
temperature to
O Off
+/– 2 °C to the set
temperature
www.dimplex.de
I
10 s
I
On
heit
I
On
Publicité
