Table des Matières
Publicité
V I D E O P O R T E R O E L E C T R Ó N I C O - V I D E O D O O R E N T R Y S Y S T E M S - V I D É O P O R T I E R É L E C T R O N I Q U E
INSTRUCCIONES DE AJUSTE
ADJUSTMENT INSTRUCTIONS
INSTRUCTIONS DE RÉGLAGE
PLACA DE CALLE - ENTRANCE PANEL - PLAQUE DE RUE
1
Adjust the volume controls of the entrance panel
and of the monitors/telephones (1). If an
adjustment of greater precision is required, remove
the J2 jumper and repeat the adjustment (2).
3
Separate the upper and lower
decorative fittings, by loosening the
clamping screws.
4
Once it has been connected up, close
the panel, press it against the flush-
mounted box and fix it to this using
the clamping screws.
2
Adjust the video unit's view angle until getting the
desired orientation.
5
Adjust the upper and lower decorative
fittings.
J2
Publicité
Table des Matières
