Table des Matières
Publicité
V I D E O P O R T E R O E L E C T R Ó N I C O - V I D E O D O O R E N T R Y S Y S T E M S - V I D É O P O R T I E R É L E C T R O N I Q U E
INSTRUCCIONES DE INSTALACIÓN
I N S TA L L I N G I N S T R U C T I O N S
INSTRUCTIONS D'INSTALLATION
RECOMENDACIONES - RECOMMENDATIONS - RECOMMANDATIONS
When installing the entrance panel make sure that the sunrays or intense light sources do not fall directly on the video unit, avoiding
nonwhished effects in picture display (backlight effect) and same way keeping the operational life of the equipment.
CAJA DE EMPOTRAR - FLUSH MOUNTED BOX - BOÎTIER ENCASTRABLE
1
Break off the perforated holes that you need to
pass the cables through.
PLACA DE CALLE - ENTRANCE PANEL - PLAQUE DE RUE
1
Lever open the cover of the card-holder and insert
the card that identifies the pushbutton
2
Place the flush-mounted box in position so that
the top is 1.7 m. high.
Publicité
Table des Matières
