Télécharger Imprimer la page

Dyna-Glo DGB730SNB-1 Guide D'utilisation Et Mode D'emploi page 34

Gril à deux combustibles

Publicité

Cleaning the Burner Assembly - Make sure the grill is cool
1. Ensure all burner ports are clear of clogs. Use of a pin or paper clip works well.
2. Ensure burner is free of any damage. If damage is found, replace with new burner.
3. Ensure the end of the burner and primary air screen are clear from insect nests, dirt or debris.
Re-installing the Burner
• Ensure the gas valve orifices are correctly positioned inside burner inlet (venturi).
• The use of a flashlight may be necessary to ensure the correct position.
• It is recommended to view the correct position through the firebox vent holes as illustrated.
View the correct position from the bottom
of firebox.
Dual Fuel Grill
CARE AND MAINTENANCE
Burner Assembly
Bottom View
Correct
Wrong
31
Wrong

Publicité

loading

Ce manuel est également adapté pour:

Dgb730snb-dDgb730snb