Publicité
■
Follow all special requirements on packaging and
labelling when transporting batteries by a third party.
Ensure that no batteries can come in contact with other
batteries or conductive materials while in transport by
protecting exposed connectors with insulating, non-
conductive caps or tape. Do not transport batteries
that are cracked or leaking. Check with the forwarding
company for further advice.
MAINTENANCE
■
Use only original manufacturer's replacement parts,
accessories, and attachments. Failure to do so can cause
possible injury, can contribute to poor performance, and
may void your warranty.
■
Servicing requires extreme care and knowledge
and should be performed only by a qualified service
technician. Have the product serviced by an authorised
service centre only.
■
Turn off the product and remove the battery pack before
conducting any maintenance or cleaning work.
■
You may make adjustments or repairs described in this manual.
For other repairs, contact an authorised service centre.
■
For the replacement line, use only a nylon filament line of the
diameter described in the specifications table of this manual.
■
After each use, clean the product with a soft, dry cloth.
Any part that is damaged should be properly repaired or
replaced by an authorised service centre.
■
Check all nuts, bolts, and screws before each use and
at frequent intervals for proper tightness to ensure that
the product is in safe working condition. Any part that is
damaged should be properly repaired or replaced by an
authorised service centre.
■
Bring the product to an authorised service centre to
replace damaged or unreadable labels.
KNOW YOUR PRODUCT
See page 121.
1. Harness
2. Harness hanger
3. Rear handle
4. On/Off trigger
5. Lock-out trigger
6. Speed selector
7. Upper shaft
8. Knob
9. Hanger cap
10. Front handle
11. Lower shaft
12. Safety guard
13. Cut-off blade
14. Operator's manual
15. Lock pin
16. Speed winder
17. Bump feed
18. Cutting line
19. Battery pack
20. Charger
6
SYMBOLS
Safety alert
Read and understand all instructions
before operating the product. Follow all
warnings and safety instructions.
Do not expose the product to rain or
damp conditions.
Wear eye, ear, and head protection.
Wear non-slip, heavy-duty gloves.
Wear non-slip safety footwear when
using the product.
Do not use metal blade(s) on the product.
Remove the battery pack before starting
any work on the product.
Beware of thrown or fl ying objects.
Keep all bystanders, especially children
and pets, at least 15 m away from the
operating area.
Keep hands away from cut-off blade.
95
Guaranteed sound power level
Do not dispose of waste batteries, waste
electrical and electronic equipment as
unsorted municipal waste. Waste batteries
and waste electrical and electronic
equipment must be collected separately.
Waste batteries, waste accumulators, and
light sources have to be removed from the
equipment. Check with your local authority
or retailer for recycling advice and collection
point. According to local regulations,
retailers may have an obligation to take
back waste batteries and waste electrical
and electronic equipment free of charge.
Your contribution to the reuse and recycling
of waste batteries and waste electrical and
electronic equipment helps to reduce the
demand of raw materials. Waste batteries,
in particular containing lithium, and waste
electrical and electronic equipment contain
valuable and recyclable materials, which
can adversely impact the environment and
the human health if not disposed of in an
environmentally compatible manner. Delete
personal data from waste equipment, if any.
Publicité
