Publicité
GB/IE
GB
IE
TABLE
Assembly instructions
1. Introduction ..........................................................8
2. Safety ...................................................................8
3. Scope of delivery (A) ..........................................8
4. Technical specifications ......................................9
5. Safety information ...............................................9
6. Assembly ..............................................................9
7. Cleaning and care instructions...........................9
8. Disposal ................................................................9
9. Warranty ............................................................10
10. Warranty conditions .........................................10
11. Distributor ...........................................................10
12. Service address .................................................10
1. Introduction
Congratulations!
With your purchase you have opted for a high-qual-
ity product. Familiarize yourself with the product
before using it for the first time. Please read the fol-
lowing assembly instructions carefully. Only use the
product as described and for the specific areas of
application. They contain important information for
safety, use and disposal. Familiarise yourself with all
of the operating and safety information before using
the product. Keep these assembly instructions in a
safe place. Also provide all of the documentation
when passing the product on to third parties.
Explanation of symbols
The following symbols and signal words are used in
these assembly Instructions, on the product or on the
packaging.
In the following, the Table is referred to as the pro-
duct.
WARNING!
!
This signal symbol/word indicates a hazard with a
high level of risk which, if not avoided, may result in
death or serious injury.
CAUTION!
!
This signal symbol/word indicates a hazard with a
low level of risk which, if not avoided, may result in
minor or moderate injury.
8
NOTE!
This signal word warns of possible property damage
or provides you with useful additional information
regarding the use.
This symbol indicates additional information.
This symbol indicates that the product should
>17KG
be lifted by a minimum of two people.
This symbol indicates interior use only.
This symbol indicates potential danger to
children.
This symbol indicates how the product may
be loaded.
This symbol indicates how the product may
not be loaded.
This symbol indicates that the product is not
a climbing aid.
This symbol indicates the maximum load
max.
weight.
kg
These symbols inform you about
the disposal of the packaging
and product.
04
LDPE
This symbol provides information about the
www.fsc.org
FSC
certificate.
®
100 %
Holz
Wood
Bois
FSC
®
C124851
2. Safety
Intended use
The product is not intended for commercial use. Dif-
ferent use or a modification to the product are not
deemed as intended use and may lead to risks, such
as injuries and damage. The distributor assumes no
liability for damage that results from improper use.
The product is exclusively suitable for interior
use.
3. Scope of delivery (A)
2 x
Frame A
2 x
Cross brace B
1 x
Table top C
4 x
Reinforcing strut D
8 x
Threaded screw M6 x 20 mm E
8 x
Threaded screw M6 x 45 mm F
4 x
Threaded screw M6 x 80 mm G
4 x
Plastic foot H
20 x Washer I
20 x Circlip J
1 x
Allen key 4 mm K
1x
Assembly instructions
4. Technical specifications
Type: Table
IAN: 355566_2004
Tradix Item No.: 355566-20-A
Measurements: approx. 117 x 80 x 75.5 cm (W x
D x H)
Weight: approx. 18.5 kg
Maximum load: 25 kg
Material: Wood, metal
Production date: 08/2020
Warranty: 3 Years
5. Safety information
WARNING!
!
Risk of injury and suffocation!
If children play with the product
or the packaging, they may injure
themselves or suffocate!
-
Do not let children play with the product or the
packaging.
-
Supervise children who are close to the product.
WARNING!
!
Risk of injury!
A defective product is not allowed to be
used! There is a risk of injury!
-
Do not use the product in the case of malfunc-
tions, damage or defects.
-
Significant danger can occur for the user in the
case of improper repairs.
6. Assembly
1. Remove all packaging materials.
2. Check whether all parts are available and unda-
maged, see Fig. A.
If this is not the case, notify the specified service
address.
For assembly, you will need an Allen key K (in the
scope of supply).
Mount the product as shown in Fig. B to Fig. D.
-
CAUTION!
!
Risk of injury!
There is a risk of injury due to the
weight.
>17KG
- If you intend to move the product, lift it with
two people.
-
Avoid pushing the product over the floor. The
floor could become scratched.
CAUTION!
!
Risk of injury!
There is a risk of injury due to tumbling or
falling.
- The product is not a climbing aid.
- Never stand or sit on the product.
CAUTION!
!
Danger of property damage!
The product is not allowed to be
overloaded.
max.
kg
- Load the product only up to the max.
weight indication, see Fig. E.
- Only load the product in the middle.
- Do not load the product on the edge, it
can tip over.
7. Cleaning and care instructions
7.
NOTE!
Danger of material damage!
-
only clean with a damp cloth
-
only use a a mild detergent
-
do not use any strong detergents and/or chemi-
cals
-
do not use sharp-edged tools such as spatulas or
similar, they can damage the surface
8. Disposal
Disposal of the packaging
The packaging and operating in-
structions are made of 100 % en-
vironmentally friendly materials,
04
which you may dispose of at lo-
LDPE
cal recycling centres.
Disposal of the product
The product may not be disposed of with normal
household waste. Please find out about disposal
options for the product from your local authority or
GB/IE
9
Publicité
