Publicité
A
• Figure C - Hang the vac on the wall by
placing the opening on the base of the vac
over the hooks in the wall mount bracket
as shown in figure C.
C
• Figure D - Insert the jack plug into the
charging socket.
D
Charging the battery (CHV1410L32)
WARNING:
only with the supplied charger.
From new, the rechargeable cells of the
product need a minimum charge time of 9
hours to ensure full power.
The charge is complete when the charging
indicator lights continuously. The charger and
the battery can be left connected indefinitely
with the LED illuminated. The LED will
change to flashing (charging) state as the
charger occasionally tops off the battery
charge.
• The switch must be in the off ("O")
position, the product will not charge if it is
in any other position.
Downloaded from
www.Manualslib.com
For use
manuals search engine
• Figure E - Plug the jack plug of the
B
charger into the charging socket of the
tool. Plug the charger into any standard
120 Volt 60 Hz electrical outlet.
E
While charging, the charger may get
warm, this is perfectly normal and safe. It
is safe to leave the appliance connected
to the charger indefinitely. The charger
automatically reduces power consumption
when charging is complete.
WARNING:
charge the battery at ambient temperatures
below 39°F (4°C) or above 104°F (40°C).
Charging the battery (CHV1410)
WARNING:
charge the battery at ambient temperatures
below 39°F (4°C) or above 104°F (40°C).
The charge is complete when the charging
indicator lights continuously. The charger
and the battery can be left connected
indefinitely with the LED illuminated. The
LED will change to flashing (charging) state
as the charger occasionally tops off the
battery charge.
• Charge discharged batteries within
1 week. Battery life will be greatly
diminished if stored in a discharged state.
• Place the appliance on the charging base
as shown.
• Plug in the charger. The charging indicator
will flash continuously (slowly).
• Leave the appliance to charge.
F
4
Do not
Do not
Publicité
