Publicité
ENGLISH
TROUBLESHOOTING
Minor problems often can be fixed without calling
customer service.
PROBLEM
Motor does not run
Suction capacity
decreases
Vacuum stops
running
Dust comes out
while vacuuming
SOLUTION
Check power cord, plugs and outlet.
Ensure the on/off switch is in the
ON position (I).
Remove blockages in the nozzle,
extension wands, hose or filter.
Replace the disposable filter bag.
Check for proper installation of the
filter.
Clean or replace the filter.
Empty the dust tank, refer to
the tank
Operating
under
instructions.
Thermal overload has been tripped:
1. Turn the vacuum off and
disconnect vacuum cleaner from
power source.
2. Empty the dust tank, if needed.
3. Allow the unit to cool.
4. Plug the power cord into an
appropriate outlet and turn on/off
switch to the ON position (I) to
test. If vacuum does not restart
call 1-888-899-0146.
Check for proper installation of the
filter.
Ensure filter are not damaged;
replace if necessary.
Ensure filter seals are in place and
are secure.
Check the fit of the vacuum head.
Empty
8
Publicité
