Publicité
ENGLISH
Assignment of control knobs
2
4
Daily use
Adjusting the heat setting
To switch the outer ring, turn clockwise, past a slight resistance, as
far as it will go. Then, turn anti-clockwise to a desired heat setting.
Helpful hints and tips
When a cooking zone is switched on, it
may hum briefly. This is a characteristic of
all ceramic glass cooking zones and does not
impair either the function or the life of the ap-
pliance.
Energy saving
• If possible, always place lids on the pans.
• Place cookware on the cooking zone before
you switch it on.
1
3
Function
Turn clockwise to increase
Turn anti-clockwise to reduce
Turn to 0 to switch off
1
2
3
4
• The bottom of the cookware should be as
thick and flat as possible.
• Switch cooking zones off before the end of
the cooking time, to take advantage of re-
sidual heat
• Bottom of pans and cooking zones should
be the same size.
6
Knob set-
ting
1 - 9
9 - 1
/ 1 - 9
0
Publicité
