Télécharger Imprimer la page

Midea MRT18B2ASL Manuel D'utilisation page 12

Publicité

OPERATION INSTRUCTIONS
Control panal
1. Key
• A. Setting button
2. Display screen
• setting 1: LED1 COOL indicator
• setting 2: LED2 indicator
• setting 3: LED3 indicator
• setting 4: LED4 indicator
• setting 5: LED5 COOLEST indicator
EN
• setting 6: LED6 STANDBY mode
3. Display
• Once initially powered on, the display screen is on full display for 3 seconds.
The refrigerator default setting is medium, and the LED 3 indicator will be
illuminated. This is normal operation display in case of a failure, the appropriate
LED light will ash in sequence. In case of no failures, the current temperature
setting of the refrigerator will be on display.
4. Temperature setting
• Each time the temperature setting
setting changes one time.
• After the temperature setting has been completed, the refrigerator will run
according to the set value after 25s. From left to right, the temperature is
lower.
• The order of coldness settings is as follows:
5. Standby mode
• To enter standby mode, press the setting
refrigerator is running. In standby mode, the compressor will not operate and
the standby indicator light will be illuminated. To resume normal operation, just
press the setting
is pressed once, the temperature
momentarily.
12
for 3 seconds when the

Publicité

loading