Intellinet Network Solutions IES-48GM04B Instructions page 3

Instructions
Connections
• All ports on the switch support Auto-MDI/MDI-X functionality,
so you can use straight or crossover UTP/STP cables to connect
the RJ45 ports to PCs, routers, hubs, other switches, etc.
• Cat5e/6/6a/8.x UTP/STP cables provide optimal performance;
if a status LED doesn't indicate a link or activity, check the
corresponding device for proper setup and operation.
• Use the included power cable to connect the receptacle
on the back of the switch to a power outlet.
LED
RUN
1–48
Link
49S–52S
(SFP+)
Basic Web-Based Browser Management
1 Open your Web browser.
2 Enter http:// and the IP address of the switch in the Address
field. The default management IP address is 192.168.2.1.
3 Press Enter to display the login screen. In the Username
field, enter admin; in the Password field, enter the serial
number on the bottom of the switch. Click OK.
Color Status
Off
Red Blinking
Green Blinking
Off
On
Orange
Blinking Data is transmitted/received at 10/100 Mbps.
On
Green
Blinking
Off
On
Orange
Blinking
On
Green
Blinking Data is transmitted/received at 10,000 Mbps.
Operation
Check connection.
System is booting.
System has booted successfully.
No link established.
Port is connected at 10/100 Mbps.
Port is connected at 1000 Mbps.
Data is transmitted/received at 1000 Mbps.
No link established.
Port is connected at 1000 Mbps.
Data is transmitted/received at 1000 Mbps.
Port is connected at 10,000 Mbps.
English 3