Publicité
Create a Sequence
1. Letters are selected by pressing the + and - of the two Func-
tion Buttons located on the left (A).
2. Look at the Stitch Chart (B) to see which stitch number
refers to which letter or number. To program "SINGER", it
would be stitch number 29, 19, 24, 17, 15, 28 (B).
3. After selecting each letter, press the + side of the ABC
Function Button (C) for two seconds to hear two beeps.
4. You are now ready to sew out the word "SINGER". It will
stitch the letter sequence that was saved and will stop when
the sequence is completed. In order to repeat the sequence,
press the Foot Control or the Start/Stop Button.
Inserting a Stitch
1. When an error is made, for example you leave out the "E"
in SINGR.
2. Using the +/- Stitch Width Function Button scroll to the 4th
letter of the 5 stitches entered (04/05). (These numbers are
displayed under the width and length icons on the display)
3. Using the +/- side of the Pattern Adjustment Buttons, scroll
to letter E, number 15. Press the + side of the ABC Button
to enter the letter.
4. Save the new spelling of the word by pressing the + side
of the ABC Function Button for two seconds. You are now
ready to sew out the word "SINGER".
Delete a Stitch
1. Using the +/- Stitch Width Function Button scroll to the
position of the stitch you want to delete.
2. Press the – side of the ABC Function Button.
3. Save the edited sequence by pressing the + side of the ABC
Function Button for two seconds.
Clear the Memory
1. Press and hold the – side of the ABC Function Button until
all programmed stitches are gone.
2. Save by pressing the + side of the ABC Function Button for
two seconds.
20 – O perating Your Machine
20 – O perating Your Machine
English
English
A
B
C
Publicité
