Publicité
Assembly Steps
4.Install the back wheels.
As shown in the picture, turn over the car body, and remove the nut and washer on the rear
axle.
As shown in the picture, install gear box to the side.
Put the wheel through the rear axle, then install washers to both sides and fasten with nuts.
Fix the wheel hub to both sides .
5.Install the front wheel.
Remove the nut and washer on the
front axle.
As shown in the picture, fix the
washer, wheel, washer and nut onto
the axle in proper order.
Fasten the nut with spanner.
Fix the wheel hub.
Fix another wheel on the other side.
Publicité
