How To Operate Your Vehicle
(8) How to use the remote controller:
WARNING! Not for children under 3 years. Small parts. choking hazard
-Load two AAA ( 1.5V ) batteries according to the diagram .
-Non-rechargeable batteries are not to be recharged.
-Different types of batteries or new and used batteries are not to be mixed.
-Batteries are to be inserted with the correct polarity.
-Exhausted batteries are to be removed from the toy.
-The supply terminals are not to be short-circuited.
-The packaging must be retained since it contains important information.
2.4G Remote Control Instructions
Step 1: The Remote Controller is loaded with two AAA batteries.
Step 2 : Turn off the power switch on the vehicle .
Step 3 :Hold down "
power switch. The red indicator lights stop flashing,and the code is successful.
Keys caption: " S " set up speed , 1 led lit up is low speed . 2 led lit up is medium speed . 3 led lit up is high speed
Forward ,
"
"
"
" Back, "
"
& "
" keys for 3 seconds start match code, The first LED flicker ,Now turn on the vehicle
"Left, "
"Right,Press " P "key hold the brake,ALL LED flicker.