BoomToneDJ Ludipocket SG Mode D'emploi page 13

4- Menu
Display
Addr
ChNd
SLNd
Shnd
SOUD
SOEN
TEST
LEd
dISP
TiL1
TiL2
DEFT
A. By Master/Slave built-in program function.
By linking the units in master/slave connection, the first unit will control the other units
to give an automatic, sound activated, synchronized light show. This function is good
when you want an instant show. You have to set the first unit in Automatic, sound
activated mode. Its DMX input jack will have nothing plugged into it. The other units will
have to select SL1 or SL2 , Their DMX cables plugged into the DMX input jacks (daisy
chain) and the slave led lights will constantly on.
B. By universal DMX controller
Using universal DMX controller to control the units, you have to set DMX address from 1
to 512 channel so that the units can receive DMX signal.
Press the MENU, then find Addr, press ENTER, when the 1 is showing on the display.
Pressing ENTER. Use DOWN and UP button change the DMX512 address.
Value
1-512
7 Ch
15 Ch
MAST/SLA
Soun
Sh 1-24
ON; OFF
001--100
on
oFF
oFF
on
no
YES
no
YES
YES/NO
Description
DMX address
7 channel mode
15 channel mode
Master or Slave mode
Musical Mode
Show 1 to 24
Music detection mode
Microphone sensitivity
Test mode
Screen on
Screen off after 5s
Normal screen
Screen returned
Tilt1 normal
Tilt1 inverted
Tilt2 normal
Tilt2 inverted
Restart
13