SABRE SAW
Introduction
We congratulate you on the purchase of your new
product. You have chosen a high quality product.
The instructions for use are part of the product.
They contain important information concerning
safety, use and disposal. Before using the product,
please familiarise yourself with all of the safety
information and instructions for use. Only use
the product as described and for the specified
applications. If you pass the product on to anyone
else, please ensure that you also pass on all the
documentation with it.
Intended use
This sabre saw (hereinafter "product" or "power
tool") is designed for light and medium sawing
through wood, chip board, plastic, metal, and
plaster board.
The product is not intended to handle heavy
sawing work, such as in stones or in workpieces
exceeding the maximum cutting capacity
(see "Technical data").
Always use the correct saw blades according
to the intended use! Observe the technical
requirements of this product (see "Technical data")
when purchasing and using saw blades!
The LED work light
on this product is intended
[
]
to illuminate the immediate work area.
Any other use or modification of the product
are considered improper use and can result in
hazards such as death, life-threatening injuries and
damage. The manufacturer is not liable for any
damages caused by improper use. The product is
exclusively intended for domestic use. The product
is not intended for commercial use or for any other
use.
24 GB/IE
Scope of delivery
m
WARNING!
The product and the packaging are not
u
children's toys! Children must not play with
plastic bags, sheets and small parts! There is
a danger of choking and suffocation!
1× Sabre saw
1× Detachable mains cord
1× Wood saw blade
(151 × 19 × 1.1 mm, 6 TPI – teeth per inch)
1× Carrying case
1× Instruction manual
Parts description
(Fig. A)
Wood saw blade
1 ]
[
Front handle
2 ]
[
Orbital action control lever
[
3 ]
Suspension hook
[
4 ]
Arrow mark
5 ]
[
Stroke rate control panel
[
6 ]
Display
[
]
Stroke rate control button
[
]
Stroke rate control button
[
]
Lock button (rear handle)
7 ]
[
Rear handle
[
8 ]
Switch lock
9 ]
[
On/off switch
[
]
Detachable mains cord (with mains plug)
[
]
Coupler
[
]
Cover for carbon brushes
[
]
Saw blade holder
[
]
Base plate
[
]
Lock button (base plate)
[
]
LED work light
[
]
Chuck ring
[
]
Carrying case
[
]
(increase)
(decrease)