Publicité
Holiday function
The Holiday function can be used to reduce the energy consumption of the appliance,
when it is not used regularly. When the function is on, the LED lights will be off (even if the
door is open) and the fridge will work on low power consumption mode, whereas the
freezer will keep working normally.
How to use the Holiday function:
•
The function can be activated from control panel by pressing the "mode" key
until the Holiday icon turns on (an acoustic signal confirms the selection), or by
selecting the function from the app. When the function is activated, the Holiday
icon is always ON.
•
To exit the Holiday function, turn it off from the app or chose another function
from the control panel.
•
When the Holiday function ends, the icon of the control panel is switched off and
the previously set cooling levels are restored.
Defrosting
When the layer of frost present in the freezer compartment exceeds 3mm, it is
recommended to proceed with the defrosting as it increases energy consumption.
•
Switch off the appliance and disconnect the power cord.
•
Remove the frozen food and temporarily place them in a cool place.
•
Leave the freezer door open and collect the water on the bottom of
the product.
•
When defrosting is completed, dry the interior thoroughly.
•
Reconnect the power cord and set the desired values.
Wait a moment and reintroduce the frozen foods.
•
Demo mode
To enter the demo mode, with the display unlocked, keep pressed the Wi-Fi key (B) and
press the MODE key (C) 5 times within 5 seconds. To exit the demo mode, perform the
same operation or power off the refrigerator.
Error Codes
Communication error
8 °C – 6 °C – 4 °C – 3 °C – 2 °C LED lights turn on sequentially, it means there has been a
communication error between the main control board and the display board. Please,
contact the technical assistance to help solve the problem
EN 7
Publicité
