Publicité
PREPARATION FOR USE
SETTING THE WATCH TO HOME TIME
1. Unscrew the water-resistant crown counter-clockwise.
Wind the watch by approximately 40 clockwise turns of the
crown.
2. Pull the crown out to position 2 and adjust the date by turning the
24h disc forwards or backwards. The date changes with each
complete rotation of the disc.
Upon reaching the correct date, continue turning the 24h
disc until the hour hand is positioned at around
12 o'clock.
Then turn the city disc forwards or backwards in
order to position your home city opposite the 12
o'clock marker on the dial (Paris in this example),
by the shortest possible rotation.
14
14
3. Pull the crown out to position 3 - the watch will stop to enable
the time to be set to the second. Turn the hands forwards or
backwards to adjust the hour and minute while taking account of
the 24h disc display, and being careful not to move past midnight
in order to prevent a date jump.
In the example shown opposite, it is 02.15 am and not 2.15 pm
in Paris. The display simultaneously shows that it is 8.15 pm in
New York, 11.15 am in Sydney, etc.
4. Push the crown back into position 1. Press it lightly, while gently
turning clockwise, then tighten it again until you feel some resis-
tance. Do not force !
15
Publicité
