Publicité
Infinite WaterColors
Jandy
®
14. Plug the blue connector terminal black wire to terminal L on the
new PCBA.
15. Join the spa light assembly housing with the spa light lens
assembly, ensure the arrow on the lens is facing up.
16. Tighten the 6 screws on the back of the spa light in a star
pattern, see Figure 6
Figure 6
Tighten Screws in Star Pattern
17. Turn the power on at the breaker panel.
Pool & Spa LED Lights | Spare Parts Installation Manual
™
6
4
2
3
5
1
Page 11
Publicité
