Publicité
● The product has a lithium-ion battery. In case of fire, refer
to the emergency service. A dedicated extinguisher can
be used to extinguish the fire. Use water to extinguish the
fire as a last resort. Do not attempt to pick up or move a
hot, smoking, or burning product, as you can be injured.
3
Operation
3.1
To do a check of the charge level
of the internal battery
● Push the power button. The LCD display will show the
percentage of charge of the battery.
Note! The internal battery must be charged if the charge
level is below 85%. Refer to "3.2 To charge the internal
battery of the product" on page 9.
3.2 To charge the internal battery of
the product
● The internal battery must be charged if the charge level is
below 85%.
● Always charge the product as soon as possible after each
use.
● Do not let the battery be completely discharged.
1
Connect the USB-C end of the charging cable into
the input port (A). (Figure 2)
2
Connect the USB-A end of the charging cable into a
2A USB charger (B) or a 2 A USB charging port.
3
Connect the charger into an AC or DC power outlet.
The LCD display of the product lights up, the digits
begins to flash, and shows "IN".
Note! It takes 3–5 hours to fully charge the product. If a
charger with lower than 2 A is used, the charging time will
be increased.
4
When the internal battery of the product is fully
charged, the display shows "100%".
5
Disconnect the charger from the power outlet.
Remove the charging cable from the charger and
then remove the charging cable from the product.
3.3 To charge a mobile device
Note! Refer to the mobile device manufacturer for charging
power specifications.
The product has 2 different USB-A ports.
A.
Regular charging with 5 V.
B.
Quick charging with 5 V, 9 V or 12 V.
1
Connect the mobile device charging cable to the
applicable USB-A port of the product (A). (Figure 3)
2
Connect the other end of the mobile device charging
cable to the mobile device (B).
3
Push the power button. The charging starts
automatically and the display shows which USB-A
port is in use.
4
To stop the charging, disconnect the charging cable
from the mobile device and then from the product.
The product will stop automatically.
5
Recharge the product as soon as possible. Refer to
"3.2 To charge the internal battery of the product" on
page 9.
3.4 To charge a mobile device wireless
The wireless charge pad provides 10 W of power to charge
compatible mobile devices.
Note! Refer to the mobile device manufacturer to make sure
that the device supports wireless charging.
1
Place the mobile device face-up on the charging pad
of the product. (Figure 4)
2
Push the power button. Charging will start
automatically and a symbol appears on the display.
3
To stop the charging, remove the mobile device.
4
Recharge the product as soon as possible. Refer to
"3.2 To charge the internal battery of the product" on
page 9.
9
Publicité
