Publicité
6.1
Starter cable fault codes
LED
Sound
Green,
flashing
2 red, solid
Rapid beep
-
-
1 red, solid
Rapid beep
1 red and 1
Beeps once
green, solid
a second
7
Disposal
7.1
To discard the product
● Make sure that you follow local regulations when you
discard the product. Do not burn the product.
8
Technical data
Specification
Rated voltage
Current
Charging capacity
12
Description
False detection of high voltage.
The green LED indicator flashes after the
-
clamps have been connected to the
battery.
Reverse polarity protection is activated.
The smart cable is not connected
correctly to the product.
The internal battery of the product is
discharged.
The clamps are short circuited.
The battery of the vehicle is short
circuited.
Temperature protection.
Value
12 V
1500 A
37 Wh
Action
Start the engine to jump start the vehicle.
Connect the clamps correctly to the vehicle.
Refer to "3.5 To jump start a vehicle" on page
10.
Make sure that the starter cable is connected
correctly to the product.
Do a check of the charge level of the internal
battery and if needed, charge the battery. Refer to
"3.1 To do a check of the charge level of the
internal battery" on page 9.
Make sure that the clamps are connected
correctly to the vehicle. Refer to "3.5 To jump start
a vehicle" on page 10.
Replace the battery of the vehicle.
Let the product become cool before further use.
Publicité
