Publicité
V. Product Operation
The standard control of the dehumidifier has been configured internally, and additional programs are
controlled and connected according to the user's requirements. The operation is straightforward, but the machine
should be operated by a qualified professional. Before using the dehumidifier, please read the manual and all
related instructions carefully
•
Warning! Please read the instruction carefully before use, we shall not be liable for any loss caused by
failure to follow the instructions.
•
Warning! If the electrical control system fails, please ensure the main power supply is disconnected before
performing any checks or maintenance. We shall not be liable for any loss resulting from unauthorized
modifications to the circuit or related settings without proper knowledge or certainty.
Warning! We shall not be liable for any loss resulting from unauthorized changes made by the user to the control
•
circuit, control procedures, system parameters, or due to improper operation.
Power Switch with 3 positions:
"O": Off mode, all parts will stop working.
•
"MAN": Manual - device will continuously dehumidify till it is manually turned off.
•
"AUTO": The device will automatically pause when the set humidity level is reached. If the relative humidity
•
(RH) level rises above the set RH level, the machine will resume operation..
In operation mode, when the switch is turned on (either in "MAN" or "AUT" position), the blowers, wheel, and
heater will run simultaneously. The ammeter will display the current drawn by the reactivation heater once it
stabilizes, and the timer will start accumulating the machine's working time.
When the switch is in the "MAN" position, the dehumidifier fan wheel and the heater will run continuously, and the
humidistat light will glow.
The machine uses the humidity controller to control the dehumidifier on/off. The humidity controller is placed
in the dehumidifying area and the humidity scale is adjusted to the required humidity. When the environmental
humidity is higher than the setting humidity, the machine turns on and when the environmental humidity is
lower than the setting humidity, the machine turns off. The machine has its own control logic to control over
temperature and limit current.
EN
Publicité
