2.3 Safety Instructions
This manual offers guidelines for optimal operation of the dehumidifier, but these recommendations are intended
for guidance only and do not assume personal responsibility or adherence to local safety regulations. When installing
and operating the dehumidifier, individuals are responsible for the following:
★ Care about yourself and others!
★ Protect the safety of machine by conforming to the description and instructions of this manual!
The device meets all European standard safety requirements and specifications, with careful consideration given
to the safety of both personnel and equipment during its design and manufacture. Each chapter of this manual
includes safety information that clearly highlights hazardous operations, and warning symbols are provided as
cautionary reminders.
2.4 Operating Principle
● The core structure of the desiccant dehumidifier is a rotating wheel, which is a honeycomb wheel with a moisture
absorbent, made of a special composite heat-resistant material. The honeycomb rotating wheel has the
characteristics of larger moisture absorption area than surface, low circulation resistance and high dehumidification
efficiency.
● On both sides of the wheel, a diaphragm with a high seal performance divides the entire surface into two sectors: the
processing sector and the regeneration recovery sector. When processing air that needed dehumidifying enters the
processing sector, the water vapor is absorbed by the carrier in the wheel and is dried, and the latent heat is released.
The dry air is sent out through the fan. As the absorption of water increases, the processing sector becomes
saturated. To maintain its stable dehumidification performance, the saturated
● wheel is transferred to the regeneration sector under the drive of the motor, and the regeneration process starts.
Regeneration air reached 100~140℃ by heating, then reverse blowing into the regeneration area. In the high
temperature condition, the absorbed moisture in the wheel is desorbed and releases a lot of sensible heat. The
● temperature of itself reduced and it turns into the moist air filled with moisture which is discharged to the outside of
the room in the next step, and the water transfer is finished. The powerful dehumidification capacity of the wheel is
restored and continues to dehumidify in the working area. The process of dehumidification and regeneration above
mentioned is occurring at the same time. The constant working condition of this dehumidifier is ensured by drying air
and regenerating wheel continuously.
EN