Télécharger Imprimer la page

MSW Motor Technics MSW-DEH 100PT Manuel D'utilisation page 15

Publicité

III. Product Installation
3.1 Shipment and Storage
To ensure the quality and reliability of the dehumidification machine, each unit is thoroughly inspected
before delivery. If the machine needs to be stored for a period of time before installation, the following precautions
should be observed:
① Do not dismantle the transportation packaging when the machine is shipped from the factory..
② Ensure the machine is placed in a manner that avoids any physical damage.
③The machine must be stored in a covered area to protect it from dust, frost, and rain.
3.2 Product Inspections
Remove the transportation packaging from the machine and inspect the product to ensure it was not damaged
during transportation. If any damage is detected, please contact the equipment manufacturer immediately. If the
piping connected to the dehumidification machine has already been installed, check whether the pipe layout is
appropriate. If the environment or installation conditions are unsatisfactory, please reach out to the manufacturer
for assistance .
A
Regeneration blower
B
Regeneration recovery sector
C
Bleeder heater
D
Filter
E
Processing fan
F
Processing sector
G
Driver motor
H
Desiccant wheel
EN

Publicité

loading

Produits Connexes pour MSW Motor Technics MSW-DEH 100PT