DCOOK GALLERY Notice D'utilisation page 38

Setting speeds
The speed control is used to choose between the 2 speed levels and
to switch off the blender, level "0".
• Start blending at minimum speed "1".
• Then, raise the speed depending on whether the food you wish
to blend needs more or less speed.
• The blender switches off if the speed control is set at level "0.
• The blender has a pulse function. It is a short operating function
at maximum power. When this function is used, maximum speed
is reached immediately.
• Use the pulse function if you wish to do some intense blending
for a short period. For example, to make froth or crush ice (see
"Crushing ice cubes").
To enable this function:
• 1- Turn the wheel and keep it in this position P (press) as long
as you wish the operation to last. Only use this function
intermittently and never exceed the maximum operating
time.
• 2- Release the button to stop the blending process.
Use of the blender
• Clean all parts of the blender before first use, as indicated in
"Cleaning".
• Take into account the level marks. Fill the blender jug at least
up to the minimum mark (250 ml) and do not exceed the "MAX"
mark (1,500 ml).
• Do not turn on the blender without any product in it.
• Observe the maximum operating time of 60 seconds.
• Prolonged operation can overheat the motor. Let the blender cool
to room temperature before using it again.
• Before switching on the blender, make sure that there is no
cutlery or similar in the blender jug.
• Do not place large pieces of food in the jug.
• If using frozen fruit, make sure it is cut into small pieces.
• Do not blend dried fruit with shells or seeds.
• Always remove the stems of the ingredients before you start
blending.
38