Publicité
5. Put the cloth cover into the upper and lower tube assembly (the zipper facing
outwards), and insert the upper and lower tube assembly into the left and right support
tubes at the same time, and pull the zipper.
14
6. Connect the L legs and the support tubes, pull the cloth cover neatly and pull the
zipper.
After the installation is complete, fix the guardrail between the mattress and the bed
board with screws.
Height Adjustment Instructions
1. Push the height adjustment button to the left and hold it, and push it up/down to the
desired height, then release the adjustment button. A total of 4 levels can be adjusted.
2. Reference table for mattress thickness and guardrail height
Mattress Thickness
5cm-10cm
10cm-15cm
15cm-20cm
20cm-23cm
Guardrail Height
Level 1(Low)
Level 2
Level 3
Level 4(High)
15
Publicité
