Tineco Floor one S5 Serie Mode D'emploi page 25

11 Clean Water Tank Release
12 Clean Water Tank Handle
13 Clean Water Tank (CWT)
14 Brush Roller
15 Deodorizing & Cleaning Solution
16 Cleaning Tool
17 Dry Filter & Holder
18 Accessory Holder
19 Adaptor
20 Charging Dock
21 WiFi Indicator
22 DWT Full or Blocked
Dirt Monitoring Loop
23
(Blue to red according to the dirt amount)
24 AUTO Mode
25 CWT Empty
26 Brush Roller Tangled Indicator
27 Power Indicator
28 Tineco Logo
29 Self-cleaning Icon
30 Battery Level Indicator
Fig.A
ASSEMBLY
How to Assemble/Disassemble
Note:
For water tank and brush assembly, please refer
to "Operation" and "Maintenance".
• To assemble the handle, insert it into the
appliance until you hear a click.
Fig.B-1
• In the event that the handle need to be
disassembled, press the spring to release the
handle with a tool (like a screwdriver) and lift
the released handle from the appliance.
Fig.B-2
Tips:
WiFi/Mute/Language Switch Button
• Press to turn on/off the voice prompt.
• Press twice to switch languages. (More voice
languages will be added, please refer to the
actual product for now.)
*Only available in selected models.
• Hold for 3 seconds to connect to network.
Fig.B-2
OPERATION
Preparing for Use
• Before first use, please charge the appliance
for 4-5 hours (refer to "Charging Instructions"
for details).
* Based on results from Tineco lab tests. Lab
temperature 39.2°F (4°C) ~ 104°F (40°C).
1.Press the button and the appliance will start
in AUTO mode by default. Press it again to
turn off the appliance. Switch between AUTO,
MAX and SUCTION modes by pressing the
button.
Fig.C-1
Tips (SUCTION mode not available):
• Solution mode/ Water Only mode:
Appliance starts with Solution mode by default.
Power on while the appliance is upright, hold
for 3s to switch between the two modes.
• Switch to Water Only mode:
LED Loop: Red → Blue (use water only)
• Switch to Solution mode:
LED Loop: Blue → Red (use cleaning solution)
2.The appliance will stop working when put
upright and start running again when reclined.
* Do not recline more than 142° to avoid water
leakage.
Fig.C-2
3.Place the appliance on the charging dock
vertically after use for recharge and storage.
Fig.C-3
Note:
• It is crucial to choose the right mode based on
the CWT contents to achieve the highest level
of dirt detection efficiency.
• Do not vacuum foamed liquid.
23