Publicité
Play from Bluetooth Device
After successful Bluetooth connection, press the [
tracks backwards or forwards. To pause or resume play, press [
] to disconnect all paired Bluetooth devices.
Playing a compact disc (CD)
NOTE: Never touch the laser lens inside the CD compartment. Clean the laser lens using a CD cleaner disc if it
becomes dirty.
1. Press the POWER button to turn on the unit.
2. Press the MODE button repeatedly to select the CD function.
3. Press the [
] button to open the CD door and insert a CD into the tray (with printed label side facing
up).
4. Press the [
] button again to close the CD DOOR and the disc will rotate for a few seconds, then play the
1st track automatically.
5. To temporarily stop playback, press the [
6. Press the [ ] button to STOP play.
REVERSE/FORWARD
1. The [
] or [
] Buttons used to jump to a different track number or hold to scan disc tracks at high
speed.
2. Press the [
] button once to skip to the beginning of the current track. Press it two or more times to hear
previous tracks on the disc.
3. Press the [
] button to start playing the next tracks on the disc.
4. Press and hold the [
track(s); When the desired track section is found, release the button and normal play will resume.
5. Press and hold the [
When the desired track section is found, release the selected button and normal playback will resume.
REPEAT FUNCTION
The CD REPEAT button may be used to repeat a single track or repeat all tracks on a compact disc.
1. Press the REPEAT button once during playback, the "REPEAT ONE" sign will appear on the LCD display for
about 2 seconds. The same track will be repeated over and over.
2. Press the REPEAT button a second time to repeat all tracks. The "REPEAT ALL" sign will appear on the
LCD display for about 2 seconds.
3. To cancel REPEAT PLAY, press the REPEAT button repeatedly until "REPEAT OFF" appears on the LCD display
for about 2 seconds.
PROGRAM FUNCTION
The Program feature may be used to program up to 20 tracks to play in a selected order.
1. While in the stop mode only (CD is not playing), press and hold the PROG button for 2 seconds,
and the LCD display will show the wording "P 01" and "T 01" starts to flash.
2. Press the [] or [] buttons to allocate the desired track.
3. Press the PROG button to select and store the track into memory.
4. Repeat step 2 to 3 to select up to 20 tracks.
5. To play the selected tracks (in the program mode), press the [
6. Press the [ ] button to hear the previous program track or press the [ ] button to hear the next
program track.
Note: After all programmed tracks have been played, the CD player will return to the stop mode.
7. To clear the programmed tracks from memory, press [ ] button twice.
] button, and to resume playback, press it again.
] button; The current track will be rewarded towards the start of the track
] button, the current track will be sped up towards the next track(s).
] button to play. Press the [
] the button again. Press and hold the button [
] button.
15
] or [
] button to skip the
Publicité
