Snooze
1.
Whenever the alarm (alarm 1, alarm 2) comes on, it can be temporarily suspended for a short period of
approximately 9 minutes, by pressing the "SNOOZE" key once.
2. The alarm (alarm 1, alarm 2) will then automatically sound again after approximately 9 minutes have passed.
3. The "Zz" symbol will show on the display to remind that the snooze function is active.
4. To deactivate the snooze, press and release the "POWER" key.
Sleep Timer
1. Repeatedly press the SLEEP button, you can choose between 90/80/70/60/50/40/30/20/10 minutes.
After this time, the unit will go to standby mode. This is useful for falling asleep to music at night.
2. If you want to cancel the sleep mode, repeatedly press SLEEP until OFF appears on the display
Display Backlight
You can press the DIMMER button adjust the display backlight brightness, there are 3 options available, High,
Medium and Low.
DAB Radio mode
Carefully extend the telescopic antenna.
Press the POWER button to turn on the unit, press the MODE button to select to DAB mode, it will start
up into DAB mode.
Auto Scan
1. If this is the first time the unit has entered DAB Mode, it will automatically start an 'Auto Scan' to search
for available stations. (Once DAB Mode has been used before, the unit will automatically select the
previously played station)
2. Hold the ENTER button to automatically start auto scan to search for available stations. During the
scanning process, the lower line of the display shows a bar graph indicating the progress of the scan.
Manual Scan
1. Press the MENU key to enter the menu.
2. Press the [
3. Press [
] or [
press [ENTER]
4. Press [MENU] or
5. If no stations are found, please ensure the aerial is extended and test the reception by doing
another auto scan in a different location.
] or [
] button to select "Manual tune", press the [ENTER] button to the service menu.
] enter to tune in the desired channel. A graph will indicate the signal strength if you
[ /
] to exit scan.
11