Publicité
2. Preset Store
You may store your preferred DAB stations to the preset station memories. There are 50 memory
presets in your radio. Presets are remembered by your radio in the event of a power failure.
In DAB menu, select [Preset store] with [ ] or [ ], then press [ENTER]. Press the "previous or
next" buttons to select a storage space, then press [ENTER] to confirm the desired preset
number under which you will store the station you are currently playing. Press [ENTER] to
confirm.
FM Radio
Carefully extend the telescopic aerial to its full length.
Auto Scan
1. Press the MODE key to select "FM Mode".
2. Long Press [
of sufficient signal strength.
3. After a few seconds, the display will update. The display will show the station frequency. If the signal is
strong enough and the station signal contains RDS data, then the radio will display the station name.
4. To find other stations, press and hold the [
5. To scan the FM band in the opposite direction (high frequencies to low frequencies), press the [
[
] button and hold for 2 seconds.
6. When the waveband end is reached, your radio will recommence tuning from the opposite waveband
end.
Manual Scan
1. Press the MODE key on the main unit to select "FM Mode".
2. Select FM mode as previously described, if required.
3. Press [ ] or [ ] shortly adjust tuning. Each press of the tuning button will change the frequency
up or down by 50 kHz.
4. When the waveband end is reached, the radio will recommence tuning from the opposite waveband
end. If no stations are found, please ensure the aerial is extended and test the reception by doing
another auto scan in a different location.
Menu
1. Scan Setting
In FM mode, press MENU to enter the FM menu, then press [ ] or [ ] to select [Scan setting], then press
ENTER to select the sensitivity setting:
1.1.
All stations: ~15dB
1.2.
Strong stations only: ~19dB,
] or [
] button, and your radio will scan and stop automatically when it finds a station
] or [
] button as before.
13
] or
Publicité
