Publicité
DRC (Dynamic Range Control)
Dynamic Range Control (also known as DRC) is a technology used to help make quieter sounds easier to
hear in a noisy environment.
1. In DAB menu, press the [
to the top right.
2. DRC OFF - DRC is switched off, broadcast DRC will be ignored. DRC LOW - DRC level is set to 1/2
that sent by broadcaster.
DRC HIGH - DRC level is used as sent by broadcaster.
Press MENU to confirm the setting. The display will return to normal.
Prune (To Remove Stations That are Listed But Unavailable)
In DAB menu, press [
System (DAB)
In DAB menu, press [
system settings.
1. Language
Press [ENTER] to go to language selection; the default source language is English, the selected
language will have "*" displayed at the top right. Users may choose between English, French, Italian,
Deutsch, Polish, Nederlands, Espanol
2. Factory Reset
Press [ENTER] to perform a factory reset. If you wish to perform the reset operation, push [
] until "YES" is highlighted on the display and press [ENTER]. A full reset of your radio will be
[
performed. All presets and station lists will be erased.
3. SW Version
Press [ENTER] to view DAB software version. Press Menu to stop displaying the software version.
*If there are no operations after 30 seconds, the display will return to normal.
Preset
1. Preset Recall
In DAB menu, press [
stored in preset memory.
Note: If you have not previously stored a preset station and the preset button is pressed, "Empty
preset" will be displayed.
] or [
] button to select "DRC", press the [ENTER] button to display "*"
] or [
]to display the "Prune" submenu, press [ENTER] to select the Prune option.
] or [
] to show the "SYSTEM" submenu, press the [ENTER] button to go to the
] station select "Preset Recall", then press [ENTER] to tune to the
] or [
Or press PROG. Button (11) of the remote control.
12
] or
Publicité
