Publicité
91113.14.33
The contents of this manual are considered to be
proprietary and confidential to Ingersoll Rand and
should not be reproduced without the prior written
permission of Ingersoll Rand.
Nothing contained in this document is intended to
extend any promise, warranty or representation,
expressed or implied, regarding the Ingersoll Rand
products described herein. Any such warranties or other
terms and conditions of sale of products shall be in
accordance with the standard terms and conditions of
sale for such products, which are available upon request.
This manual contains instructions and technical data to
cover all routine operation and scheduled maintenance
tasks by operation and maintenance staff. Major
overhauls are outside the scope of this manual and
should be referred to an authorised Ingersoll Rand
service department.
Any modification to any part is absolutely prohibited and
would result in the CE Certification and marking being
rendered invalid.
All components, accessories, pipes and connectors added
to the compressed air system should be:
•
of good quality, procured from a reputable
manufacturer and, wherever possible, be of a type
approved by Ingersoll Rand.
•
clearly rated for a pressure at least equal to the
machine maximum allowable working pressure.
•
compatible with the compressor lubricant/coolant.
•
accompanied with instructions for safe installation,
operation and maintenance.
Details of approved equipment are available from
Ingersoll Rand Service departments.
The use of non−genuine spare repair parts other than
those included within the Ingersoll Rand approved parts
list may create hazardous conditions over which
Ingersoll Rand has no control. Therefore
Ingersoll Rand does not accept any liability for losses
caused by equipment in which non−approved repair
parts are installed. Standard warranty conditions may be
affected.
Ingersoll Rand reserves the right to make changes and
improvements to products without notice and without
incurring any obligation to make such changes or add
such improvements to products sold previously.
The intended uses of this machine are outlined below and
examples of unapproved usage are also given, however
Ingersoll Rand cannot anticipate every application or
work situation that may arise.
8044766 Rev.A
FOREWORD
IF IN DOUBT CONSULT SUPERVISION .
This machine has been designed and supplied for
use only in the following specified conditions and
applications:
•
Compression of normal ambient air containing no
known or detectable additional gases, vapours. or
particles
•
Operation within the ambient temperature range
specified in the product specifications sheet.
The use of the machine in any of the situation types
listed in table 1:−
a) Is not approved by Ingersoll Rand,
b) May impair the safety of users and other persons,
and
c) May prejudice any claims made against
Ingersoll Rand .
TABLE 1
Use of the machine to produce compressed air for:
a) direct human consumption
b) indirect human consumption, without suitable
filtration and purity checks.
Use of the machine outside the ambient temperature
range specified in the product specifications sheet
Use of the machine where there is any actual or
foreseeable risk of hazardous levels of flammable gases
or vapours.
THIS MACHINE IS NOT INTENDED AND MUST NOT BE
USED IN POTENTIALLY EXPLOSIVE ATMOSPHERES,
INCLUDING SITUATIONS WHERE FLAMMABLE GASES OR
VAPOURS MAY BE PRESENT.
Use of the machine fitted with non Ingersoll Rand
approved components.
Use of the machine with safety or control components
missing or disabled.
Connection to an electrical supply of incorrect voltage
and/or frequency.
The company accepts no responsibility for errors in
translation of this manual from the original English
version.
INTELLISYS® is a registered trademark of Ingersoll Rand
Company USA.
Publicité
