Publicité
Where to locate the appliance
•
The heater is designed for floor-standing use exclusively. Ensure it is positioned upright on a
stable, level, dry, and heat-resistant floor surface. Pay attention to all safety instructions
provided in the previous pages.
•
Make sure there are no flammable or heat sensitive materials or substances within 1 m of the
heater.
•
Do not use the appliance in rooms with a surface area of less than 4m².
Connection
•
Make sure the unit is properly assembled before use.
•
Plug in the heater making sure the voltage indicated on its rating label coincides with the power
supply.
•
To avoid overloading a circuit only plug the heater into a circuit that has no other appliances
connected.
•
Do not plug it into a power board or socket adaptor; do not use an extension cord.
•
The heater can be operated from the control panel on the unit, or with the supplied remote
control.
•
The buttons on both operate the same functions. When using the remote control, ensure it
contains 2 x "AAA" size batteries. When using the remote control, always point at the control
panel of the heater with a maximum distance of 2 meters.
Control panel and remote-control functions
Heating Modes
1. Once the heater is plugged in, press the side switch, it will enter into standby mode.
2. To initiate the heating, press the Power button
heater is functioning.
3. Select the different heating modes by pressing the MODE button
. The heating icon
5
English -
indicating that the
.
Publicité
