Télécharger Imprimer la page

HAEGER Digital XI OH-011.009A Mode D'emploi page 6

Publicité

Description of the appliance
1 – Control Panel
3 – Ventilation slots
5 – Remote control
Assembly
The heater is packaged with the wheels and brackets unattached.
Once fitted allow at least five minutes for all the oil to reach the heating element prior to connecting
the power supply.
WARNING:
Do not operate without the wheels attached.
Always operate the heater only in upright position (feet on the bottom, controls on the top), any
other position could cause irreparable harm.
It is normal when heaters are turned on for the first time, or when they are turned on after having
not been used for a long period, they may emit some smells and fumes. This will disappear when
the heater has been on for a short while.
1. Begin by positioning the radiator body upside-down on a surface that won't scratch it, ensuring
it remains stable and secure.
2. Unscrew the wing nuts from the provided U-shaped bolt. Then, affix the U-shaped bolt onto
the U- facing flange located between the first and second fins near the front cover of the
radiator (Fig 1).
3. Attach the castor mounting plate to the radiator body by inserting the threaded ends of the U
bolt into the corresponding holes on the mounting plate.
4. Reattach the wing nuts onto the U bolt and securely fasten them, ensuring proper alignment
and firm attachment of the mounting plate.
Note: Do not over tighten as you may cause damage to the radiator flange.
5. Next, remove the spherical nut from the castor. Align the shaft of the castor with the hole on
the castor mounting plate, insert it, and screw the spherical nut back on to secure it in place.
6. Repeat the preceding steps on the rear of the radiator to mount the remaining castors,
ensuring each step is performed with precision and care.
Note: Ensure the rear castors are installed specifically between the last two fins. It is important to
follow the instruction manual precisely to assemble the front wheels and panel as described. Failure
to do so may result in the oil heater becoming unstable and potentially falling off.
2 – Radiant fins
4 – Castors
4
English -

Publicité

loading