Publicité
5. Do not exceed the lifter's capacity. Overloading can damage the lifter and
may lead to injury or material damage.
6. Use the lawn mower lifter on hard, stable surfaces only. Using it on soft or
uneven surfaces can make it unstable, causing the load to fall.
7. Always secure the load along the lateral reinforcement of the lifter on the
side opposite the screw spindle. An unsecured or uneven load may damage
the lifter or cause it to slide and fall.
8. Inspect the lifter for completeness and functionality before each use.
Perform a test lift without any load to confirm.
9. Ensure the riding lawn mower driver has exited the seat before lifting the
mower.
Assembly before use
1. Place the lawn mower on a horizontal, stable surface.
2. Remove the locking peg.
3. Position the screw crank upwards.
Tip: For optimal performance, apply grease to the screw before use.
Operation
3. Insert the peg to lock the screw crank in the upright position.
4. Turn the spindle clockwise to lift the lawn mower.
EN
Publicité
