Personal Protective Equipment; Safety Instructions For Maintenance - Husqvarna CG 200 Manuel D'utilisation

Personal protective equipment

WARNING: You must use approved
personal protective equipment whenever
you use the product. Personal protective
equipment cannot eliminate the risk of injury
but it will reduce the degree of injury if an
accident does happen. Ask your dealer for
help in choosing the right equipment.
WARNING: The use of products such as
cutters, grinders, drills, that sand or form
material can generate dust and vapors
which may contain hazardous chemicals.
Check the nature of the material you intend
to process and use an appropriate breathing
mask. Long-term exposure to noise can
result in permanent hearing impairment.
Always use approved hearing
protection.Listen for warning signals or
shouts when you are wearing hearing
protection. Always remove your hearing
protection as soon as the engine stops.
Always wear:
• Approved protective helmet.
• Hearing protection.
• Approved eye protection. If you use a face shield
then you must also wear approved protective
googles.
• Breathing mask.
• Heavy-duty, firm grip gloves.
• Tight-fitting, heavy-duty and comfortable clothing
that permits full freedom of movement.
• Boots with steel toe-caps and non-slip sole.
• Always have a first aid kit nearby.
Fuel safety
The level of the fuel and oil need be checked regularly.
Consult the engine manufacturer manual if necessary.
WARNING: Take into account the working
conditions from health and safety point of
wiew.
General
WARNING: The product should be switched
off with the power cable disconnected from
the outlet.
To interchange the drums
1. Unscrew the three screws.
2. Remove the side plate.
130 - 003 - 18.08.2017
WARNING: Running an engine in a confined
or badly ventilated area can result in death
due to asphyxiation or carbon monoxide
poisoning. Use fans to ensure proper air
circulation when working in trenches or
ditches deeper the one meter (3 foot).
WARNING: Fuel and fuel fumes are highly
flammable and can cause serious injury
when inhaled or allowed to come in contact
with the skin. For this reason observe
caution when handling fuel and make sure
there is adequate ventilation. The exhaust
fumes from the engine are hot and may
contain sparks which can start a fire. Never
start the product indoors or near
combustible material!
WARNING: Do not smoke and do not place
any hot objects in the vicinity of fuel.

Safety instructions for maintenance

WARNING: Inspection and/or maintenance
should be carried out with the motor
switched off and the plug disconnected.
CAUTION: Drum inspection is carried out
through the side plate. Product tilted
backwards rested on the handlebar leads to
damaging oil leakage.
We recommend that the respect of the maintenance
intervals and periodical checks should be obey and
implemented and only genuine spare parts be used for
repairs and maintenance.
Assembly
7