Table Des Matières; Introduction; Product Description; Intended Use - Husqvarna CG 200 Manuel D'utilisation

Introduction..................................................................... 2
Safety..............................................................................5
Assembly........................................................................ 7
Operation........................................................................ 8
Maintenance................................................................. 10

Product description

To be used on concrete, asphalt, paint and other
coatings, glue and steel, and should not be used for any
other purpose than described in this manual.
2
Contents
Troubleshooting............................................................ 11
Transportation, storage and disposal........................... 12
Technical data.............................................................. 13
Service..........................................................................14
EC Declaration of Conformity....................................... 14

Introduction

Intended use

For scarifying, milling grooving, texturing, and cleaning.
130 - 003 - 18.08.2017