Publicité
▪
Do not attempt to replace a damaged power cord, contact your after-sales service.
▪
The power socket must be easily accessible but out of reach of children. In case of doubt,
contact your installation technician.
▪
When positioning the appliance, ensure that the power cord is not pinched or damaged.
Daily utilisation
▪
Do not store inflammable substances or fluids inside the appliance. This would create a
risk of explosion.
▪
Do not operate other electrical equipment inside the appliance (mixers, whirling rotor for
ice cream, etc.).
▪
When disconnecting the appliance, grip the plug firmly and do not pull on the cable.
▪
This appliance is designed for food and beverage storage.
▪
Do not expose the appliance to direct sunlight.
▪
Keep the appliance away from candles, luminaires and open flames, in order to avoid
fire risk.
▪
The appliance is heavy. Be careful when moving it.
▪
If your appliance is equipped with castors, remember that these are only designed to
facilitate minor movements. Do not move the appliance over long distances.
▪
Do not lean or climb on the appliance or its elements.
▪
This refrigerating appliance is not intended to be used as a built-in appliance
▪
In order to avoid falling objects and to prevent damage to the appliance, do not overload
the compartments of the appliance.
Caution! Cleaning and servicing
▪
Before carrying out servicing, switch off the power supply and disconnect the appliance.
▪
When cleaning the appliance, do not use metal objects, steam systems, volatile fluids,
organic solvents or abrasive substances.
▪ Do not use sharp or pointed objects to remove ice. Use a plastic scraper .
Important information concerning installation!
▪
To ensure proper electrical connection, follow the recommendations given in the present
manual.
▪
Unpack the appliance and visually check that it is not damaged. Do not connect a
damaged appliance. Inform your retailer or point of sale of any damage. In such a case,
keep the packaging.
▪
It is recommended that the appliance be allowed to settle for at least 4 hours before
connecting the electrical power supply, so that the compressor fluid feed is correct.
▪
Proper air circulation is necessary to avoid overheating. To ensure sufficient ventilation,
observe the installation recommendations provided.
▪
In order to avoid fire risk, wherever possible, ensure that the appliance is not in contact
with walls or with any hot element (compressor, condenser). Observe the installation
recommendations.
▪
The appliance should not be placed close to radiators or cooking hot plates or gas rings.
▪
Check that electrical sockets remain accessible when the appliance is installed.
19
Publicité
