Publicité
14 | English
Always wait until the power tool has come to a com-
u
plete stop before placing it down. The application tool
can jam and cause you to lose control of the power tool.
In case of damage and improper use of the battery, va-
u
pours may be emitted. The battery can set alight or ex-
plode. Ensure the area is well ventilated and seek medical
attention should you experience any adverse effects. The
vapours may irritate the respiratory system.
Do not open the battery. There is a risk of short-circuit-
u
ing.
The battery can be damaged by pointed objects such
u
as nails or screwdrivers or by force applied externally.
An internal short circuit may occur, causing the battery to
burn, smoke, explode or overheat.
Only use the battery in the manufacturer's products.
u
This is the only way in which you can protect the battery
against dangerous overload.
Protect the battery against heat, e.g. against
continuous intense sunlight, fire, dirt, water
and moisture. There is a risk of explosion and
short-circuiting.
Symbols
The following symbols may be important for the operation of
your power tool. Please take note of these symbols and their
meaning. Correctly interpreting the symbols will help you to
operate the power tool more effectively and safely.
Symbols and their meaning
Tool data logging is enabled in this tool.
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended Use
The machine is intended for driving in and loosening screws
and bolts as well as for tightening and loosening nuts within
the respective range of dimension.
Product Features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1)
Tool holder
(2)
Rotational direction switch
1 609 92A 9DX | (07.05.2024)
a)
(3)
Belt clip
a)
(4)
Rechargeable battery
a)
(5)
Battery release button
(6)
User interface
(7)
On/off switch
(8)
Handle (insulated gripping surface)
(9)
Application tool (e.g. socket spanner)
a) This accessory is not part of the standard scope of delivery.
User Interface
(10) Speed preselection indicator
(11) Automatic shutdown (ABR) indicator
(12) Mode button
Technical Data
Cordless Impact Screw-
driver
Article number
Rated voltage
A)B)
No-load speed
– Setting 1
– Setting 2
– Setting 3
A)B)
Impact rate
– Setting 1
– Setting 2
– Setting 3
A)B)
Max. tightening torque
– Setting 1
– Setting 2
– Setting 3
Machine screw diameter
Tool holder
Weight
Recommended ambient tem-
perature during charging
Permitted ambient temperat-
ure during operation and dur-
ing storage
Recommended rechargeable
batteries
Recommended battery char-
gers
a)
GDS 18V-350
3 601 JM5 0..
V=
18
–1
min
1200
–1
min
1700
–1
min
2300
–1
min
1800
–1
min
2600
–1
min
3400
Nm
85
Nm
200
Nm
350
mm
M10–M18
1/2"
kg 1.5 (2.0 Ah)–2.5
(12.0 Ah)
°C
0 to +35
°C
–20 to +50
GBA 18V...
ProCORE18V...
GAL 18...
GAX 18...
GAL 36...
Bosch Power Tools
Publicité
