Frequently Asked Questions; Technical Data - Marmitek MEGAVIEW20 Guide Utilisateur

Tip: see for all possibilities www.marmitek.com

7. FREQUENTLY ASKED QUESTIONS

No image, no sound
• Check if all cables are connected properly.
• Check if the channel is set correctly.
The MegaView20 picture is interfered and all the other
channels are o.k.
There might be a TV channel too close to the selected MegaView20
channel. Choose another channel for the MegaView20 (preferably the
middle one of three or if possible five free channels).
Interference with the other channels
Choose another channel, preferably the middle of three free channels in the
band.
Distorted sound
Turn down the volume of the connected device.
Do you have any questions that are not answered here? Then check
www.marmitek.com.

8. TECHNICAL DATA

MONO RF Modulator
Power:
Standard:
Modulation frequency range: UHF: 471.25~855.25MHz channel 21-69
Input:
Output level:
Insertion loss:
Carrier wave audio:
Modulation method:
Size:
MEGAVIEW20
230VAC/50Hz, DC 9V/200mA
PAL B/G
Video, Audio L+R (SCART, RCA)
72 dBµV +/- 3dB in 75 Ohm
< 1,5dB at 860MHz
5.5MHz
Double side band modulation
120 x 84 x 33mm
9