Publicité
EN
• The mounting surface must be even and stable enough to support the solar panel.
• Ensure that the designated mounting surface is sufficiently dimensioned.
• Ensure that the mounting surface is made of materials that withstand the high temperatures caused by the solar
panel.
• Observe the maximum flexibility of the solar panel (see
• Ensure there is enough room to access the solar panels and other fixed components for future maintenance.
• Ensure not to block any existing ventilation openings on the vehicle.
• Shading can reduce the performance of the solar panel. Ensure that fixed components, such as air conditioners or
opened satellite antennas, do not shade the solar panel.
• Choose a location with direct sunlight for optimal performance.
• Place several solar panels as close to each other as possible.
• Do not glue the solar panels or roof ducts to rubberized surfaces (e.g. exterior planking), as the adhesion of the
glue is not guaranteed.
Preparing the installation
1. Mark the bonding surfaces on the vehicle.
8
Fig.
on page 8).
Publicité
